File:3D-Printed Shower Head Holder 02.jpg

Original file ‎(4,032 × 3,024 pixels, file size: 1.44 MB, MIME type: image/jpeg)

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	12:01, 18 November 2018		4,032 × 3,024 (1.44 MB)	Heiko (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPhone 7
Exposure time	1/5 sec (0.2)
F Number	f/1.8
ISO speed rating	100
Date and time of data generation	10:34, 18 November 2018
Lens focal length	3.99 mm
Latitude	52° 15′ 27.62″ N
Longitude	8° 29′ 11.39″ E
Altitude	156.045 meters above sea level
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	12.1
File change date and time	10:34, 18 November 2018
Exposure Program	Normal program
Exif version	2.21
Date and time of digitizing	10:34, 18 November 2018
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	2.1849361129792
APEX aperture	1.6959937156324
APEX brightness	−0.41199119911991
APEX exposure bias	0
Metering mode	Pattern
Flash	Flash did not fire, compulsory flash suppression
DateTimeOriginal subseconds	548
DateTimeDigitized subseconds	548
Supported Flashpix version	1
Sensing method	One-chip color area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	28 mm
Scene capture type	Standard
GPS time (atomic clock)	09:34
Speed unit	Kilometers per hour
Speed of GPS receiver	0
Reference for direction of image	True direction
Direction of image	3.1269836425781
Reference for bearing of destination	True direction
Bearing of destination	3.1269836425781
GPS date	18 November 2018