3D-Printed 1/10th Snow Plough: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 5: | Line 5: | ||
* STL file: [[Media:RC Snow Plough STL.zip]] | * STL file: [[Media:RC Snow Plough STL.zip]] | ||
* Source (OpenSCAD): [[Media:RC Snow Plough SCAD.zip]] | * Source (OpenSCAD): [[Media:RC Snow Plough SCAD.zip]] | ||
* Building tipps | * Building tipps | ||
** Get a pipe at home depot with a diameter of about 100mm, and cut it in half to make the snow plow. | |||
** Use M3 screws | |||
** Use a standard servo | |||
Please note: [[3D-Designs Fineprint]]. | Please note: [[3D-Designs Fineprint]]. |
Revision as of 22:45, 9 February 2017
1/10 Scale Snow Plough
- Description: A snow plough for use with 1/10th scale verhicles, like the Axial SCX10
- Photos
- The printed thing:
Media:RCSnowPlough03.m4v
- The printed thing:
- STL file: Media:RC Snow Plough STL.zip
- Source (OpenSCAD): Media:RC Snow Plough SCAD.zip
- Building tipps
- Get a pipe at home depot with a diameter of about 100mm, and cut it in half to make the snow plow.
- Use M3 screws
- Use a standard servo
Please note: 3D-Designs Fineprint.
- Links
- Footnotes: