3D-Printed 1/10th Snow Plough

From Wurst-Wasser.net
Revision as of 21:47, 9 February 2017 by Heiko (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

1/10 Scale Snow Plough

  • Description: A snow plough for use with 1/10th scale verhicles, like the Axial SCX10
  • Photos
  • STL file: Media:RC Snow Plough STL.zip
  • Source (OpenSCAD): Media:RC Snow Plough SCAD.zip
  • Building tipps
    • Get a pipe at home depot with a diameter of about 100mm, and cut it in half to make the snow plow.
    • Use M3 screws
    • Use a standard servo

Please note: 3D-Designs Fineprint.