3D-Printed 1/10th Snow Plough

From Wurst-Wasser.net
Revision as of 22:47, 9 February 2017 by Heiko (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

1/10 Scale Snow Plough

  • Description: A snow plough for use with 1/10th scale verhicles, like the Axial SCX10
  • Photos
  • STL file: Media:RC Snow Plough STL.zip
  • Source (OpenSCAD): Media:RC Snow Plough SCAD.zip
  • Building tipps
    • Get a pipe at home depot with a diameter of about 100mm, and cut it in half to make the snow plow.
    • Use M3 screws
    • Use a standard servo

Please note: 3D-Designs Fineprint.

Retrieved from "https://www.wurst-wasser.net//wiki/index.php?title=3D-Printed_1/10th_Snow_Plough&oldid=5552"