3D-Printed Battery Brace for Tamiya TA-02SW

From Wurst-Wasser.net
Revision as of 22:44, 1 January 2019 by Heiko (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

If you like this - take a look at this: 3D-Printed Battery Brace for Tamiya TA-02SW (Again)

The Mission

My nVision 2s 4500mAh LiPos won't fit Tamiya TA-02SW chassis, because the battery is too long (the original battery brace can't be attached). Therefore I made my own battery brace.

The Result

3D-Printed Battery Brace for Tamiya TA-02SW 01.jpg 3D-Printed Battery Brace for Tamiya TA-02SW 02.jpg 3D-Printed Battery Brace for Tamiya TA-02SW 03.jpg 3D-Printed Battery Brace for Tamiya TA-02SW 04.jpg

Instructions

Use the second part as a pattern to drill the holes according to your battery, first with a 2.5mm, then a 5mm drill (or use two 2.5mm drills instead :-) ).

The Downloads


Links