3D-Printed Battery Brace for Tamiya TA-02SW (Again): Difference between revisions

From Wurst-Wasser.net
Jump to navigation Jump to search
No edit summary
Line 3: Line 3:
=== The Mission ===
=== The Mission ===
My nVision 2s 4500mAh [[LiPo]]s won't fit Tamiya TA-02SW chassis, because the battery is too long (the original battery brace can't be attached).
My nVision 2s 4500mAh [[LiPo]]s won't fit Tamiya TA-02SW chassis, because the battery is too long (the original battery brace can't be attached).
Therefore I made my own battery brace, this time, remixing https://www.thingiverse.com/thing:895757
Therefore I made my own battery brace, this time remixing https://www.thingiverse.com/thing:895757 - find my remix here: https://www.thingiverse.com/thing:3327610


=== The Result ===
=== The Result ===

Revision as of 22:52, 1 January 2019

After you've seen 3D-Printed Battery Brace for Tamiya TA-02SW, you might like this:

The Mission

My nVision 2s 4500mAh LiPos won't fit Tamiya TA-02SW chassis, because the battery is too long (the original battery brace can't be attached). Therefore I made my own battery brace, this time remixing https://www.thingiverse.com/thing:895757 - find my remix here: https://www.thingiverse.com/thing:3327610

The Result

3D-Printed Battery Brace for Tamiya TA-02SW Again 01.jpg 3D-Printed Battery Brace for Tamiya TA-02SW Again 02.jpg

The Downloads


Links