3D-Printed Lights mounting on bonnet

From Wurst-Wasser.net
Revision as of 23:21, 12 March 2019 by Heiko (talk | contribs) (Created page with "=== The Mission === After my son broke the lights on my bronco I needed a replacement. Working, if possible... === The Result === Image:3D-Printed Lights mounting on bonnet...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The Mission

After my son broke the lights on my bronco I needed a replacement. Working, if possible...

The Result

3D-Printed Lights mounting on bonnet 01.jpg 3D-Printed Lights mounting on bonnet 02.jpg 3D-Printed Lights mounting on bonnet 03.jpg 3D-Printed Lights mounting on bonnet 04.jpg 3D-Printed Lights mounting on bonnet 05.jpg 3D-Printed Lights mounting on bonnet 06.jpg 3D-Printed Lights mounting on bonnet 07.jpg 3D-Printed Lights mounting on bonnet 08.jpg

Instructions

  • 100% infill
  • PLA does fine
  • Support might be a good idea

The Downloads

Links

Retrieved from "https://www.wurst-wasser.net//wiki/index.php?title=3D-Printed_Lights_mounting_on_bonnet&oldid=6191"