3D-Printed SCX Jeep Rubicon Taillight

From Wurst-Wasser.net
Revision as of 23:03, 10 January 2019 by Heiko (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The Mission

I found this on Thingiverse, but I found it rather complicated to install. This is what I changed:

  • one piece tail light
  • reuse of the standard screw/screwhole

The Result

3D-Printed SCX Jeep Rubicon Taillight 01.jpg 3D-Printed SCX Jeep Rubicon Taillight 02.jpg 3D-Printed SCX Jeep Rubicon Taillight 03.jpg 3D-Printed SCX Jeep Rubicon Taillight 04.jpg 3D-Printed SCX Jeep Rubicon Taillight 05.jpg

Instructions

  • 100% infill
  • translucent filament would be a good idea :)
  • PLA does fine
  • Reuse the screws from the original body kit.
  • paint with black/red colour

The Downloads


Links