3D-Printed battery brace yokomo BD8 2018

From Wurst-Wasser.net
Revision as of 14:58, 30 March 2018 by Heiko (talk | contribs) (→‎The Downloads)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The Mission

I wanted braces to use with my bloated lipos. (battery tape won't work with those)

The Result

3D batterybrace yokomo 01.png 3D batterybrace yokomo 02.png 3D batterybrace yokomo 03.png

The Assembly

  • rear brace: use the provided M3 flat head and two additional M2.5 screws
  • front brace: use the provided M3 flat head and two additional M2.5 screws, the inner should be a set screw because it might jam the steering
  • inner brace: use the provided M3 flat head and one additional M3x5mm setscrew

The Downloads

Links

Retrieved from "https://www.wurst-wasser.net//wiki/index.php?title=3D-Printed_battery_brace_yokomo_BD8_2018&oldid=5712"