3D-Prints for Bruder Cat Skid Steer RC Conversion

From Wurst-Wasser.net
Revision as of 07:59, 23 July 2017 by Heiko (talk | contribs) (Created page with "=== The Mission === I allways wanted to own heavy equipment. Excavators, Dozers, Wheel Loaders, and so on. But they were pretty pricy…then I stumbled over [https://www.brude...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The Mission

I allways wanted to own heavy equipment. Excavators, Dozers, Wheel Loaders, and so on. But they were pretty pricy…then I stumbled over Bruder toys…and decided to start with something easy: A huge dozer built as a toy-rc-conversion - then I started a more complicated conversion: This Cat Skid Steer!

The Images

3D SkidSteer 01.jpg 3D SkidSteer 02.jpg 3D SkidSteer 03.jpg File:3D SkidSteer 04.png File:3D SkidSteer 05.png

The Idea

  • Buy a Bruder Cat Skid Steer
  • Buy cheap remote (I used Fly Sky FS-T6)
  • Buy four (or if you prefer 2WD: two servos for driving the wheels (I used Hextronik D-MG16) [1]
  • Get some M3 screws and nuts
  • Print the parts listed below
  • Build it :-)
  • Have fun!

The How To

You can find a video on youTube: https://youtu.be/TO BE DONE

The Files


  • Links
  • Footnotes
  1. Hint: If you use 4WD and have trouble getting the servos in neutral (standing still) all at once - try using a ESC instead of the built-in electronics! But make sure, the ESCs don't have a brake and are running same speed in both directions