CTC DIY Printer Wiring: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=== The Issue === The problem is, that the build manual of my CTC DIY printer is really bad (at least the english version). Most of the problems are purely mechanically and ca...") |
No edit summary |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
The problem is, that the build manual of my CTC DIY printer is really bad (at least the english version). Most of the problems are purely mechanically and can be solved on the spot. | The problem is, that the build manual of my CTC DIY printer is really bad (at least the english version). Most of the problems are purely mechanically and can be solved on the spot. | ||
But the wiring shown in the manual is completely confusing if not just wrong. | But the wiring shown in the manual is completely confusing, if not just wrong. | ||
=== The Solution === | === The Solution === | ||
| Line 10: | Line 9: | ||
=== Long story short === | === Long story short === | ||
Attention: This worked for me - make sure, you have the same printer, mainboard revision etc. before you try this! | Attention: This worked for me - make sure, you have the same printer, mainboard revision etc. before you try this! | ||
[[Image:CTCDIYWiring.jpg]] | [[Image:CTCDIYWiring.jpg|800px]] | ||
[[Category:3D | [[Category:3D Printing]] | ||
Latest revision as of 20:14, 12 August 2017
The Issue
The problem is, that the build manual of my CTC DIY printer is really bad (at least the english version). Most of the problems are purely mechanically and can be solved on the spot.
But the wiring shown in the manual is completely confusing, if not just wrong.
The Solution
I found this great video: https://www.youtube.com/watch?v=vBHIVRri-HI
Long story short
Attention: This worked for me - make sure, you have the same printer, mainboard revision etc. before you try this!
