File:3D-Printed Setup Wheelnuts customizable 04.jpg

Size of this preview: 800 × 551 pixels. Other resolution: 2,955 × 2,037 pixels.

Original file ‎(2,955 × 2,037 pixels, file size: 1.48 MB, MIME type: image/jpeg)

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	12:05, 12 April 2019		2,955 × 2,037 (1.48 MB)	Heiko (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPhone 7
Exposure time	1/50 sec (0.02)
F Number	f/1.8
ISO speed rating	25
Date and time of data generation	15:06, 11 April 2019
Lens focal length	3.99 mm
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	Photos 4.0
File change date and time	15:06, 11 April 2019
Exposure Program	Normal program
Exif version	2.21
Date and time of digitizing	15:06, 11 April 2019
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	5.6439283242329
APEX aperture	1.6959938128384
APEX brightness	5.3287257705752
APEX exposure bias	0
Metering mode	Pattern
Flash	Flash did not fire, compulsory flash suppression
DateTimeOriginal subseconds	705
DateTimeDigitized subseconds	705
Supported Flashpix version	1
Sensing method	One-chip color area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	28 mm
Scene capture type	Standard
IIM version	2