Home Automation with Raspberry Pi: Difference between revisions
Jump to navigation
Jump to search
| Line 36: | Line 36: | ||
=== Update the Software === | === Update the Software === | ||
Use the graphical interface or some CLI (apt) tool. | Use the graphical interface or some CLI (apt) tool. Setting up WiFi might help :) | ||
=== Set up 1-wire === | === Set up 1-wire === | ||
Revision as of 21:58, 5 December 2018
The Why Of Fry
TBD
Preparation
Parts list
• Raspberry Pi (I formerly used this Rev 2 for http://www.wurst-wasser.net/wiki/index.php/Tomat-O-Mat - I have a garden now and don’t need it anymore) • Power supply for the Pi • DHT11 (side project RaspberryPi Humidity and Temperature Sensor)
- DS18B20 (side project RaspberryPi Temperature Sensor)
- some resistors, cables, wires, boards, and the usual soldering equipment
Setting up the Pi
Since the Pi was running Debian Wheezy (which is AFAIK obsolete) I decided to install Raspbian Stretch.
- Download it here: https://www.raspberrypi.org/downloads/
I skipped NOOBS and did the installation myself (with help from https://www.raspberrypi.org/documentation/installation/installing-images/README.md and https://www.raspberrypi.org/documentation/installation/installing-images/mac.md ):
# diskutil list […] /dev/disk5 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *15.8 GB disk5 1: Windows_FAT_32 58.7 MB disk5s1 2: Linux 15.8 GB disk5s2 # diskutil unmountDisk /dev/disk5 Unmount of all volumes on disk5 was successful # dd bs=1m if=2018-11-13-raspbian-stretch-full.img of=/dev/rdisk5 conv=sync 5052+0 records in 5052+0 records out 5297405952 bytes transferred in 486.102151 secs (10897722 bytes/sec) # diskutil eject /dev/rdisk5 Disk /dev/rdisk5 ejected #
After that, enable interfaces (ssh, camera port or 1-wire) as needed.
Update the Software
Use the graphical interface or some CLI (apt) tool. Setting up WiFi might help :)