Home Automation with Raspberry Pi: Difference between revisions
Jump to navigation
Jump to search
(Created page with "== The Why Of Fry == TBD == Preparation == === Parts list === • Raspberry Pi (I formerly used this Rev 2 for http://www.wurst-wasser.net/wiki/index.php/Tomat-O-Mat - I have...") |
|||
Line 10: | Line 10: | ||
* some resistors, cables, wires, boards, and the usual soldering equipment | * some resistors, cables, wires, boards, and the usual soldering equipment | ||
=== Setting up the Pi === | === Setting up the [[Pi]] === | ||
Since the Pi was running Debian Wheezy (which is AFAIK obsolete) I decided to install [[Raspbian]] Stretch. | Since the [[Pi]] was running Debian Wheezy (which is AFAIK obsolete) I decided to install [[Raspbian]] Stretch. | ||
* Download it here: https://www.raspberrypi.org/downloads/ | * Download it here: https://www.raspberrypi.org/downloads/ | ||
Revision as of 19:40, 5 December 2018
The Why Of Fry
TBD
Preparation
Parts list
• Raspberry Pi (I formerly used this Rev 2 for http://www.wurst-wasser.net/wiki/index.php/Tomat-O-Mat - I have a garden now and don’t need it anymore) • Power supply for the Pi • DHT11 (side project RaspberryPi Humidity and Temperature Sensor)
- DS18B20 (side project RaspberryPi Temperature Sensor)
- some resistors, cables, wires, boards, and the usual soldering equipment
Setting up the Pi
Since the Pi was running Debian Wheezy (which is AFAIK obsolete) I decided to install Raspbian Stretch.
- Download it here: https://www.raspberrypi.org/downloads/
I skipped NOOBS and did the installation myself (with help from https://www.raspberrypi.org/documentation/installation/installing-images/README.md and https://www.raspberrypi.org/documentation/installation/installing-images/mac.md ):
# diskutil list […] /dev/disk5 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *15.8 GB disk5 1: Windows_FAT_32 58.7 MB disk5s1 2: Linux 15.8 GB disk5s2 # diskutil unmountDisk /dev/disk5 Unmount of all volumes on disk5 was successful #