RaspberryPi Temperature Sensor: Difference between revisions

From Wurst-Wasser.net
Jump to navigation Jump to search
Line 84: Line 84:
  # Generate the graph
  # Generate the graph
  test -f "${GFILEPLOTCOMMANDS}" && rm "${GFILEPLOTCOMMANDS}"
  test -f "${GFILEPLOTCOMMANDS}" && rm "${GFILEPLOTCOMMANDS}"
echo "reset" >> "${GFILEPLOTCOMMANDS}"
  echo "set key inside right top vertical Right noreverse enhanced autotitles columnhead nobox" >> "${GFILEPLOTCOMMANDS}"
  echo "set key inside right top vertical Right noreverse enhanced autotitles columnhead nobox" >> "${GFILEPLOTCOMMANDS}"
# Set time format for X axis
  echo "set timefmt \"%H:%M\"" >> "${GFILEPLOTCOMMANDS}"
  echo "set timefmt \"%H:%M\"" >> "${GFILEPLOTCOMMANDS}"
  echo "set xdata time" >> "${GFILEPLOTCOMMANDS}"
  echo "set xdata time" >> "${GFILEPLOTCOMMANDS}"
  echo "set format x \"%H:%M\"" >> "${GFILEPLOTCOMMANDS}"
  echo "set format x \"%H:%M\"" >> "${GFILEPLOTCOMMANDS}"
# Setup line style (#1) for the temperature line
echo "set style line 1 lc rgb '#8b1a0e' pt 1 ps 1 lt 1 lw 2" >> "${GFILEPLOTCOMMANDS}" # http://www.gnuplotting.org/tag/grid/
  echo "set style data lines" >> "${GFILEPLOTCOMMANDS}"
  echo "set style data lines" >> "${GFILEPLOTCOMMANDS}"
  echo "set xtics \"01:00\" rotate by 90 offset 0,-2 out" >> "${GFILEPLOTCOMMANDS}"
  echo "set title \"Temperature on day ${GTIMESTAMPDATEHUMANREADABLE}\"" >> "${GFILEPLOTCOMMANDS}"
# Set X tics (one tic per hour, rotate that tick-labels by 90 deg and move em a bit)
  echo "set xtics \"01:00\" rotate by 90 offset 0,-2 out nomirror" >> "${GFILEPLOTCOMMANDS}"
# Setup Grid (with line style #12)
echo "set style line 12 lc rgb '#E0E0E0' lt 0 lw 1" >> "${GFILEPLOTCOMMANDS}" # http://www.gnuplotting.org/tag/grid/
echo "set grid back ls 12" >> "${GFILEPLOTCOMMANDS}" # http://www.gnuplotting.org/tag/grid/
# Setup Title
  echo "set title \"Temperature on ${GTIMESTAMPDATEHUMANREADABLE}\"" >> "${GFILEPLOTCOMMANDS}"
# Label X and Y Axis
  echo "set ylabel \"°C\"" >> "${GFILEPLOTCOMMANDS}"
  echo "set ylabel \"°C\"" >> "${GFILEPLOTCOMMANDS}"
  echo "set xlabel \"Time\"" >> "${GFILEPLOTCOMMANDS}"
  echo "set xlabel \"Time\" offset 0,-0.5" >> "${GFILEPLOTCOMMANDS}"
# Setup Y range
  echo "set yrange [ 0.000 : ] noreverse nowriteback" >> "${GFILEPLOTCOMMANDS}"
  echo "set yrange [ 0.000 : ] noreverse nowriteback" >> "${GFILEPLOTCOMMANDS}"
  echo "set term svg" >> "${GFILEPLOTCOMMANDS}"
# Set output file type to svg and plot it into file
  echo "set term svg size 640,480" >> "${GFILEPLOTCOMMANDS}"
  echo "set output \"${GFILEGRAPH}\"" >> "${GFILEPLOTCOMMANDS}"
  echo "set output \"${GFILEGRAPH}\"" >> "${GFILEPLOTCOMMANDS}"
  echo "plot \"${GFILELOG}\" using 1:2 title 'Temperature'" >> "${GFILEPLOTCOMMANDS}"
  echo "plot \"${GFILELOG}\" using 1:2 title 'Temperature' with l ls 1" >> "${GFILEPLOTCOMMANDS}"
  cat "${GFILEPLOTCOMMANDS}" | gnuplot  
  cat "${GFILEPLOTCOMMANDS}" | gnuplot


You might want to use a cronjob like this:
You might want to use a cronjob like this:

Revision as of 22:03, 20 June 2013

Time to build a temperature sensor with my Pi.

Schematics

RaspberryPiDS18B20.png

Configure the Pi

Update the OS

This not necessary, but generally a good idea.

apt-get update
apt-get ugrade

Install missing packages

If you have already installed them, you can skip this step.

apt-get install bc
apt-get install gnuplot

Setup kernel modules for GPIO and 1-wire device

modprobe w1-gpio
modprobe w1-therm

Check setup

Check whether there is now our sensor device:

cd /sys/bus/w1/devices
ls -1
10-000802ad5087[1]
w1_bus_master1

See it's content (values):

cd 10-000802ad5087[2]
cat w1_slave
39 00 4b 46 ff ff 03 10 9c : crc=9c YES
39 00 4b 46 ff ff 03 10 9c t=28562[3]

Code

This is how I read the device and generate a nice plot using GNUplot:

#!/bin/bash
#set -x
#
# Script: readTemperature.sh
# Author: Heiko Kretschmer
# Purpose: Reading the temperature and generating a nice plot
#
#

#
# Globals
#
GDEVICEID="10-000802ad5087"
GDEVICESPATH="/sys/bus/w1/devices"
GDEVICEVALUEFILE="w1_slave"
GTIMESTAMPFORMAT="%Y-%m-%d_%H:%M"
GTIMESTAMP="`date +${GTIMESTAMPFORMAT}`"
GTIMESTAMPTIME="`date '+%H:%M'`"
GTIMESTAMPDATE="`date '+%Y-%m-%d'`" # ISO 8601 date format
GTIMESTAMPDATEHUMANREADABLE="`date '+%A, %Y-%m-%d'`"
GFOLDERBASE="/home/pi/Development/temperature"
GFOLDERLOGS="${GFOLDERBASE}/logs"
GFOLDERGRAPHS="${GFOLDERBASE}/graphs"
GFOLDERTMP="${GFOLDERBASE}/tmp"
GFILELOG="${GFOLDERLOGS}/readTemperature_${GTIMESTAMPDATE}.log"
GFILEGRAPH="${GFOLDERGRAPHS}/readTemperature_${GTIMESTAMPDATE}.svg"
GFILEPLOTCOMMANDS="${GFOLDERTMP}/readTemperature-plot.cmd"

#
# Main
#

# Init
test ! -d "${GFOLDERLOGS}" && mkdir "${GFOLDERLOGS}"
test ! -d "${GFOLDERGRAPHS}" && mkdir "${GFOLDERGRAPHS}"
test ! -d "${GFOLDERTMP}" && mkdir "${GFOLDERTMP}"

# Get the temperature
VALUERAW="`cat \"${GDEVICESPATH}/${GDEVICEID}/${GDEVICEVALUEFILE}\" | grep t= | cut -d= -f2`"
VALUE="`echo \"scale = 3; ${VALUERAW} / 1000\" | bc`"
#echo Temperature: ${VALUE}

# Write it into the log (one logfile per day to get nice graphs)
echo -e "${GTIMESTAMPTIME}\t${VALUE}" >> "${GFILELOG}"

# Generate the graph
test -f "${GFILEPLOTCOMMANDS}" && rm "${GFILEPLOTCOMMANDS}"
echo "reset" >> "${GFILEPLOTCOMMANDS}"
echo "set key inside right top vertical Right noreverse enhanced autotitles columnhead nobox" >> "${GFILEPLOTCOMMANDS}"

# Set time format for X axis
echo "set timefmt \"%H:%M\"" >> "${GFILEPLOTCOMMANDS}"
echo "set xdata time" >> "${GFILEPLOTCOMMANDS}"
echo "set format x \"%H:%M\"" >> "${GFILEPLOTCOMMANDS}"

# Setup line style (#1) for the temperature line
echo "set style line 1 lc rgb '#8b1a0e' pt 1 ps 1 lt 1 lw 2" >> "${GFILEPLOTCOMMANDS}" # http://www.gnuplotting.org/tag/grid/
echo "set style data lines" >> "${GFILEPLOTCOMMANDS}"

# Set X tics (one tic per hour, rotate that tick-labels by 90 deg and move em a bit)
echo "set xtics \"01:00\" rotate by 90 offset 0,-2 out nomirror" >> "${GFILEPLOTCOMMANDS}"

# Setup Grid (with line style #12)
echo "set style line 12 lc rgb '#E0E0E0' lt 0 lw 1" >> "${GFILEPLOTCOMMANDS}" # http://www.gnuplotting.org/tag/grid/
echo "set grid back ls 12" >> "${GFILEPLOTCOMMANDS}" # http://www.gnuplotting.org/tag/grid/

# Setup Title
echo "set title \"Temperature on ${GTIMESTAMPDATEHUMANREADABLE}\"" >> "${GFILEPLOTCOMMANDS}"

# Label X and Y Axis
echo "set ylabel \"°C\"" >> "${GFILEPLOTCOMMANDS}"
echo "set xlabel \"Time\" offset 0,-0.5" >> "${GFILEPLOTCOMMANDS}"

# Setup Y range
echo "set yrange [ 0.000 : ] noreverse nowriteback" >> "${GFILEPLOTCOMMANDS}"

# Set output file type to svg and plot it into file
echo "set term svg size 640,480" >> "${GFILEPLOTCOMMANDS}"
echo "set output \"${GFILEGRAPH}\"" >> "${GFILEPLOTCOMMANDS}"
echo "plot \"${GFILELOG}\" using 1:2 title 'Temperature' with l ls 1" >> "${GFILEPLOTCOMMANDS}"
cat "${GFILEPLOTCOMMANDS}" | gnuplot

You might want to use a cronjob like this:

*/15 * * * *    /home/pi/Development/temperature/readTemperature.sh > /dev/null 2&>1

And this is how it looks:
No, there's no mistake, it was veery hot in my living room all night and all day, until a lightning storm came


  1. This will differ, since this is the UID of my device.
  2. This will differ, since this is the UID of my device.
  3. This is the temperature in degrees celsius (multiplied by 1000), therefore I have 28.562°C in my living room. OMG! It's frickin' hot!