3D-Printed Battery Brace for Tamiya TA-02SW: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
Line 1: | Line 1: | ||
=== The Mission === | === The Mission === | ||
My nVision 2s 4500mAh [[LiPo]]s won't fit Tamiya TA-02SW chassis, because the battery is too long (the battery brace can't be attached). | My nVision 2s 4500mAh [[LiPo]]s won't fit Tamiya TA-02SW chassis, because the battery is too long (the original battery brace can't be attached). | ||
Therefore I made my own battery brace. | Therefore I made my own battery brace. | ||
Revision as of 22:00, 23 October 2018
The Mission
My nVision 2s 4500mAh LiPos won't fit Tamiya TA-02SW chassis, because the battery is too long (the original battery brace can't be attached). Therefore I made my own battery brace.
The Result
Instructions
Use the second part as a pattern to drill the holes according to your battery, first with a 2.5mm, then a 5mm drill (or use two 2.5mm drills instead :-) ).
The Downloads
Links