3D-Printed Battery Brace for Tamiya TA-02SW: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=== The Mission === I wanted to try printing my own setup tools & gauges for my 1/10th scale touring cars. === The Result === Image:3D-Printed Battery Brace for Tamiya TA-0...") |
No edit summary |
||
(9 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
''If you like this - take a look at this: [[3D-Printed Battery Brace for Tamiya TA-02SW (Again)]]'' | |||
=== The Mission === | === The Mission === | ||
I | My nVision 2s 4500mAh [[LiPo]]s won't fit Tamiya TA-02SW chassis, because the battery is too long (the original battery brace can't be attached). | ||
Therefore I made my own battery brace. | |||
=== The Result === | === The Result === | ||
[[Image:3D-Printed Battery Brace for Tamiya TA-02SW 01. | [[Image:3D-Printed Battery Brace for Tamiya TA-02SW 01.jpg|666px]] | ||
[[Image:3D-Printed Battery Brace for Tamiya TA-02SW. | [[Image:3D-Printed Battery Brace for Tamiya TA-02SW 02.jpg|666px]] | ||
[[Image:3D-Printed Battery Brace for Tamiya TA-02SW. | [[Image:3D-Printed Battery Brace for Tamiya TA-02SW 03.jpg|666px]] | ||
[[Image:3D-Printed Battery Brace for Tamiya TA-02SW. | [[Image:3D-Printed Battery Brace for Tamiya TA-02SW 04.jpg|666px]] | ||
=== Instructions === | |||
Use the second part as a pattern to drill the holes according to your battery, first with a 2.5mm, then a 5mm drill (or use two 2.5mm drills instead :-) ). | |||
=== The Downloads === | === The Downloads === | ||
Line 14: | Line 20: | ||
Links | Links | ||
* [[List of 3D-Designs]] | * [[List of 3D-Designs]] | ||
* Thingiverse: https://www.thingiverse.com/thing: | * Thingiverse: https://www.thingiverse.com/thing:3171829 | ||
[[Category:3D Printing]] | [[Category:3D Printing]] |
Latest revision as of 23:44, 1 January 2019
If you like this - take a look at this: 3D-Printed Battery Brace for Tamiya TA-02SW (Again)
The Mission
My nVision 2s 4500mAh LiPos won't fit Tamiya TA-02SW chassis, because the battery is too long (the original battery brace can't be attached). Therefore I made my own battery brace.
The Result
Instructions
Use the second part as a pattern to drill the holes according to your battery, first with a 2.5mm, then a 5mm drill (or use two 2.5mm drills instead :-) ).
The Downloads
Links