3D-Printed Battery Brace for Tamiya TA-02SW

From Wurst-Wasser.net
Revision as of 19:49, 23 October 2018 by Heiko (talk | contribs) (→‎The Result)
Jump to navigation Jump to search

The Mission

My nVision 2s 4500mAh LiPos won't fit Tamiya TA-02SW chassis, because the battery is too long (the battery brace can't be attached). Therefore I made my own battery brace.

The Result

3D-Printed Battery Brace for Tamiya TA-02SW 01.jpg 3D-Printed Battery Brace for Tamiya TA-02SW 02.jpg 3D-Printed Battery Brace for Tamiya TA-02SW 03.jpg 3D-Printed Battery Brace for Tamiya TA-02SW 04.jpg

Instructions

Use the second partdo trill the holes according to your battery, first with a 2.5mm, then a 5mm drill.

The Downloads

Links

Retrieved from "https://www.wurst-wasser.net//wiki/index.php?title=3D-Printed_Battery_Brace_for_Tamiya_TA-02SW&oldid=5817"