3D-Printed Battery Brace for Tamiya TA-02SW (Again): Difference between revisions

From Wurst-Wasser.net
Jump to navigation Jump to search
(Created page with "''After you've seen 3D-Printed Battery Brace for Tamiya TA-02SW, you might like this:'' === The Mission === My nVision 2s 4500mAh LiPos won't fit Tamiya TA-02SW chass...")
 
 
(2 intermediate revisions by the same user not shown)
Line 3: Line 3:
=== The Mission ===
=== The Mission ===
My nVision 2s 4500mAh [[LiPo]]s won't fit Tamiya TA-02SW chassis, because the battery is too long (the original battery brace can't be attached).
My nVision 2s 4500mAh [[LiPo]]s won't fit Tamiya TA-02SW chassis, because the battery is too long (the original battery brace can't be attached).
Therefore I made my own battery brace.
Therefore I made my own battery brace, this time remixing https://www.thingiverse.com/thing:895757 - find my remix here: https://www.thingiverse.com/thing:3327610


=== The Result ===
=== The Result ===
Line 15: Line 15:
Links
Links
* [[List of 3D-Designs]]  
* [[List of 3D-Designs]]  
* Thingiverse: https://www.thingiverse.com/thing:TBD
* Thingiverse: https://www.thingiverse.com/thing:3327610 (remix of: https://www.thingiverse.com/thing:895757 )


[[Category:3D Printing]]
[[Category:3D Printing]]

Latest revision as of 22:52, 1 January 2019

After you've seen 3D-Printed Battery Brace for Tamiya TA-02SW, you might like this:

The Mission

My nVision 2s 4500mAh LiPos won't fit Tamiya TA-02SW chassis, because the battery is too long (the original battery brace can't be attached). Therefore I made my own battery brace, this time remixing https://www.thingiverse.com/thing:895757 - find my remix here: https://www.thingiverse.com/thing:3327610

The Result

3D-Printed Battery Brace for Tamiya TA-02SW Again 01.jpg 3D-Printed Battery Brace for Tamiya TA-02SW Again 02.jpg

The Downloads


Links