3D-Printed Battery Cap for Gens Ace Hardcase LiPos

From Wurst-Wasser.net
Revision as of 00:30, 25 January 2019 by Heiko (talk | contribs) (Created page with "=== The Mission === I needed a way to determine the state of my LiPos when I take them out of the box. These fit Gens Ace 2s 5300mAH and 6000mAh. === The Result === Image:3...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The Mission

I needed a way to determine the state of my LiPos when I take them out of the box. These fit Gens Ace 2s 5300mAH and 6000mAh.

The Result

3D-Printed Battery Cap for Gens Ace Hardcase LiPos 01.jpg 3D-Printed Battery Cap for Gens Ace Hardcase LiPos 02.jpg 3D-Printed Battery Cap for Gens Ace Hardcase LiPos 03.jpg 3D-Printed Battery Cap for Gens Ace Hardcase LiPos 04.jpg

Instructions

  • 100% infill
  • PLA does fine

The Downloads


Links