3D-Printed Bumper for Tamiya TA-02SW

From Wurst-Wasser.net
Revision as of 21:13, 8 March 2019 by Heiko (talk | contribs)
Jump to navigation Jump to search

After you've seen 3D-Printed Battery Brace for Tamiya TA-02SW (Again), you might like this:

The Mission

The original bumper is not much of a help if you hit a wall if you're racing on an indoor track. The chassis, and the body shell, could use a foam bumper. This design provides a mount for a PU bumper. In my case I used EPP for the actual bumper. I used Shoe Goo to glue the EPP to the print.

The Result

3D-Printed Bumper for Tamiya TA-02SW 01.jpg 3D-Printed Bumper for Tamiya TA-02SW 02.jpg 3D-Printed Bumper for Tamiya TA-02SW 03.jpg 3D-Printed Bumper for Tamiya TA-02SW 04.jpg 3D-Printed Bumper for Tamiya TA-02SW 05.jpg 3D-Printed Bumper for Tamiya TA-02SW 06.jpg 3D-Printed Bumper for Tamiya TA-02SW 07.jpg

The Downloads


Links