3D-Printed Lights mounting on bonnet: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=== The Mission === After my son broke the lights on my bronco I needed a replacement. Working, if possible... === The Result === Image:3D-Printed Lights mounting on bonnet...") |
|||
Line 16: | Line 16: | ||
* PLA does fine | * PLA does fine | ||
* Support might be a good idea | * Support might be a good idea | ||
* Use some scrap lexan to cut lenses. You can also print the lenses, or at least use printed lenses as mask for cutting out the lexan lenses. | |||
=== The Downloads === | === The Downloads === |
Revision as of 23:34, 12 March 2019
The Mission
After my son broke the lights on my bronco I needed a replacement. Working, if possible...
The Result
Instructions
- 100% infill
- PLA does fine
- Support might be a good idea
- Use some scrap lexan to cut lenses. You can also print the lenses, or at least use printed lenses as mask for cutting out the lexan lenses.
The Downloads
Links
- List of 3D-Designs
- Thingiverse
- This design: https://www.thingiverse.com/thing:XX