Difference between revisions of "3D-Printed Monitor Stand with drawers for Asus VS247HR 23,6inch display (Stackable, Customizable)"

From Wurst-Wasser.net
Jump to: navigation, search
(Created page with "=== The Mission === The display's stand is too low for my liking. I used to use my PowerBook 180c as a riser - but that felt just wrong. The poor P'Book. So I created this sta...")
 
(The Result)
Line 10: Line 10:
 
[[Image:3D-Printed Monitor Stand with drawers for Asus VS247HR 03.jpg|666px]]
 
[[Image:3D-Printed Monitor Stand with drawers for Asus VS247HR 03.jpg|666px]]
 
[[Image:3D-Printed Monitor Stand with drawers for Asus VS247HR 04.jpg|666px]]
 
[[Image:3D-Printed Monitor Stand with drawers for Asus VS247HR 04.jpg|666px]]
 +
[[Image:3D-Printed Monitor Stand with drawers for Asus VS247HR 05.jpg|666px]]
  
 
=== Instructions ===
 
=== Instructions ===

Revision as of 14:53, 20 December 2018

The Mission

The display's stand is too low for my liking. I used to use my PowerBook 180c as a riser - but that felt just wrong. The poor P'Book. So I created this stand, it features: - variable height - stackable - drawer

The Result

3D-Printed Monitor Stand with drawers for Asus VS247HR 01.jpg 3D-Printed Monitor Stand with drawers for Asus VS247HR 02.jpg 3D-Printed Monitor Stand with drawers for Asus VS247HR 03.jpg 3D-Printed Monitor Stand with drawers for Asus VS247HR 04.jpg 3D-Printed Monitor Stand with drawers for Asus VS247HR 05.jpg

Instructions

Just print it. 10% infill or more and support (for the stand, not the drawer) are recommended. PLA does fine.

The Downloads


Links