3D-Printed Monitor Stand with drawers for Asus VS247HR 23,6inch display (Stackable, Customizable)

From Wurst-Wasser.net
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

The Mission

The display's stand is too low for my liking. I used to use my PowerBook 180c as a riser - but that felt just wrong. The poor P'Book. So I created this stand, it features:

  • variable height
  • stackable
  • drawer

I adjusted the model to fit on my printing bed (cut the back side off). You can re-enable printing the whole thing in the .scad.

The Result

3D-Printed Monitor Stand with drawers for Asus VS247HR 01.jpg 3D-Printed Monitor Stand with drawers for Asus VS247HR 02.jpg 3D-Printed Monitor Stand with drawers for Asus VS247HR 03.jpg 3D-Printed Monitor Stand with drawers for Asus VS247HR 04.jpg 3D-Printed Monitor Stand with drawers for Asus VS247HR 05.jpg

Instructions

Just print it. 10% infill or more and support (for the stand, not the drawer) are recommended. PLA does fine.

The Downloads


Links