Difference between revisions of "3D-Printed SCX Jeep Rubicon Taillight"

From Wurst-Wasser.net
Jump to: navigation, search
(Created page with "=== The Mission === I found [https://www.thingiverse.com/thing:3270298 this] on Thingiverse, but I found it rather complicated to install. This is what I changed: - one pi...")
 
Line 2: Line 2:
 
I found [https://www.thingiverse.com/thing:3270298 this] on [[Thingiverse]], but I found it rather complicated to install.
 
I found [https://www.thingiverse.com/thing:3270298 this] on [[Thingiverse]], but I found it rather complicated to install.
 
This is what I changed:
 
This is what I changed:
- one piece tail light
+
* one piece tail light
- reuse of the standard screw/screwhole
+
* reuse of the standard screw/screwhole
 
 
  
 
=== The Result ===
 
=== The Result ===

Revision as of 23:49, 7 January 2019

The Mission

I found this on Thingiverse, but I found it rather complicated to install. This is what I changed:

  • one piece tail light
  • reuse of the standard screw/screwhole

The Result

3D-Printed SCX Jeep Rubicon Taillight 01.jpg 3D-Printed SCX Jeep Rubicon Taillight 02.jpg 3D-Printed SCX Jeep Rubicon Taillight 03.jpg

Instructions

Just print it. 100% infill and translucent filament would be a good idea. PLA does fine.

The Downloads


Links