3D-Printed SCX Jeep Rubicon Taillight

From Wurst-Wasser.net
Revision as of 23:49, 7 January 2019 by Heiko (talk | contribs) (Created page with "=== The Mission === I found [https://www.thingiverse.com/thing:3270298 this] on Thingiverse, but I found it rather complicated to install. This is what I changed: - one pi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The Mission

I found this on Thingiverse, but I found it rather complicated to install. This is what I changed: - one piece tail light - reuse of the standard screw/screwhole


The Result

3D-Printed SCX Jeep Rubicon Taillight 01.jpg 3D-Printed SCX Jeep Rubicon Taillight 02.jpg 3D-Printed SCX Jeep Rubicon Taillight 03.jpg

Instructions

Just print it. 100% infill and translucent filament would be a good idea. PLA does fine.

The Downloads


Links