3D-Printed SCX Jeep Rubicon Taillight

From Wurst-Wasser.net
Revision as of 22:49, 7 January 2019 by Heiko (talk | contribs) (Created page with "=== The Mission === I found [https://www.thingiverse.com/thing:3270298 this] on Thingiverse, but I found it rather complicated to install. This is what I changed: - one pi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

The Mission

I found this on Thingiverse, but I found it rather complicated to install. This is what I changed: - one piece tail light - reuse of the standard screw/screwhole


The Result

3D-Printed SCX Jeep Rubicon Taillight 01.jpg 3D-Printed SCX Jeep Rubicon Taillight 02.jpg 3D-Printed SCX Jeep Rubicon Taillight 03.jpg

Instructions

Just print it. 100% infill and translucent filament would be a good idea. PLA does fine.

The Downloads


Links