Difference between revisions of "3D-Printed Tamiya F-103 Battery Tray Brace"

From Wurst-Wasser.net
Jump to: navigation, search
(Created page with "* Description: The original brace won't fit the most battery packs...so I needed a wider one. * Images:<br>300px|The printed thing [[Image:F103_Bra...")
 
Line 1: Line 1:
 
* Description: The original brace won't fit the most battery packs...so I needed a wider one.
 
* Description: The original brace won't fit the most battery packs...so I needed a wider one.
* Images:<br>[[Image:F103_Brace_01.jpg|300px|The printed thing]] [[Image:F103_Brace_02.jpg|300px|The original]]
+
* Images:<br>[[Image:F103_Brace_01.jpg|300px|The printed thing]] [[Image:F103_Brace_02.jpg|300px|The original]] [[Image:3DF103Brace01.jpg|66px]]
 
* STL files: [[Media:XXX.stl]]
 
* STL files: [[Media:XXX.stl]]
 
* Source (OpenSCAD): [[Media:XXXX v1.scad]]
 
* Source (OpenSCAD): [[Media:XXXX v1.scad]]

Revision as of 10:35, 25 December 2016

  • Description: The original brace won't fit the most battery packs...so I needed a wider one.
  • Images:
    The printed thing The original 3DF103Brace01.jpg
  • STL files: Media:XXX.stl
  • Source (OpenSCAD): Media:XXXX v1.scad

Please note: 3D-Designs Fineprint.