3D-Printed Tamiya F-103 Battery Tray Brace: Difference between revisions

From Wurst-Wasser.net
Jump to navigation Jump to search
(Created page with "* Description: The original brace won't fit the most battery packs...so I needed a wider one. * Images:<br>300px|The printed thing [[Image:F103_Bra...")
(No difference)

Revision as of 09:30, 25 December 2016

  • Description: The original brace won't fit the most battery packs...so I needed a wider one.
  • Images:
    The printed thing The original
  • STL files: Media:XXX.stl
  • Source (OpenSCAD): Media:XXXX v1.scad

Please note: 3D-Designs Fineprint.