Difference between revisions of "3D-Printed battery brace yokomo BD8 2018"

From Wurst-Wasser.net
Jump to: navigation, search
(Created page with "=== The Mission === I wanted braces to use with my bloated lipos. (battery tape won't work with those) === The Result === 666px Imag...")
 
(The Downloads)
 
(One intermediate revision by the same user not shown)
Line 6: Line 6:
 
[[Image:3D batterybrace yokomo 02.png|666px]]
 
[[Image:3D batterybrace yokomo 02.png|666px]]
 
[[Image:3D batterybrace yokomo 03.png|666px]]
 
[[Image:3D batterybrace yokomo 03.png|666px]]
 +
 +
=== The Assembly ===
 +
* rear brace: use the provided M3 flat head and two additional M2.5 screws
 +
* front brace: use the provided M3 flat head and two additional M2.5 screws, the inner should be a set screw because it might jam the steering
 +
* inner brace: use the provided M3 flat head and one additional M3x5mm setscrew
  
 
=== The Downloads ===
 
=== The Downloads ===
* [[file:RC Yokomo BD8-2018 Battery Brace STL.zip]]
+
* [[file:RC Yokomo BD8-2018 Battery Brace v11 STL.zip]]
  
 
----
 
----

Latest revision as of 13:58, 30 March 2018

The Mission

I wanted braces to use with my bloated lipos. (battery tape won't work with those)

The Result

3D batterybrace yokomo 01.png 3D batterybrace yokomo 02.png 3D batterybrace yokomo 03.png

The Assembly

  • rear brace: use the provided M3 flat head and two additional M2.5 screws
  • front brace: use the provided M3 flat head and two additional M2.5 screws, the inner should be a set screw because it might jam the steering
  • inner brace: use the provided M3 flat head and one additional M3x5mm setscrew

The Downloads


Links