CTC Bizer with 0.8mm Nozzle: Difference between revisions

From Wurst-Wasser.net
Jump to navigation Jump to search
(Created page with "= About = = The Problem = = The Solution = = Lessons Learned = As the author should already have known from [https://datatracker.ietf.org/doc/html/rfc1925 RFC1925](8,9) is:...")
 
Line 7: Line 7:
= Lessons Learned =
= Lessons Learned =
As the author should already have known from [https://datatracker.ietf.org/doc/html/rfc1925 RFC1925](8,9) is:
As the author should already have known from [https://datatracker.ietf.org/doc/html/rfc1925 RFC1925](8,9) is:
''(8)  It is more complicated than you think.''
:''(8)  It is more complicated than you think.''
''(9)  For all resources, whatever it is, you need more.''
:''(9)  For all resources, whatever it is, you need more.''






[[Category:3D Printing]]
[[Category:3D Printing]]

Revision as of 11:28, 23 July 2021

About

The Problem

The Solution

Lessons Learned

As the author should already have known from RFC1925(8,9) is:

(8) It is more complicated than you think.
(9) For all resources, whatever it is, you need more.