CTC Bizer with 0.8mm Nozzle: Difference between revisions
Jump to navigation
Jump to search
(Created page with "= About = = The Problem = = The Solution = = Lessons Learned = As the author should already have known from [https://datatracker.ietf.org/doc/html/rfc1925 RFC1925](8,9) is:...") |
|||
Line 7: | Line 7: | ||
= Lessons Learned = | = Lessons Learned = | ||
As the author should already have known from [https://datatracker.ietf.org/doc/html/rfc1925 RFC1925](8,9) is: | As the author should already have known from [https://datatracker.ietf.org/doc/html/rfc1925 RFC1925](8,9) is: | ||
''(8) It is more complicated than you think.'' | :''(8) It is more complicated than you think.'' | ||
''(9) For all resources, whatever it is, you need more.'' | :''(9) For all resources, whatever it is, you need more.'' | ||
[[Category:3D Printing]] | [[Category:3D Printing]] |
Revision as of 12:28, 23 July 2021
About
The Problem
The Solution
Lessons Learned
As the author should already have known from RFC1925(8,9) is:
- (8) It is more complicated than you think.
- (9) For all resources, whatever it is, you need more.