File:3D-Printed Bumper for Tamiya TA-02SW 09.jpg

Size of this preview: 800 × 600 pixels. Other resolution: 1,024 × 768 pixels.

Original file ‎(1,024 × 768 pixels, file size: 362 KB, MIME type: image/jpeg)

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	22:21, 8 March 2019		1,024 × 768 (362 KB)	Heiko (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPhone 7
Exposure time	1/17 sec (0.058823529411765)
F Number	f/1.8
ISO speed rating	80
Date and time of data generation	21:02, 8 March 2019
Lens focal length	3.99 mm
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	Photos 4.0
File change date and time	21:02, 8 March 2019
Exposure Program	Normal program
Exif version	2.21
Date and time of digitizing	21:02, 8 March 2019
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	4.0606981863927
APEX aperture	1.6959938128384
APEX brightness	1.512538966175
APEX exposure bias	0
Metering mode	Pattern
Flash	Flash did not fire, compulsory flash suppression
DateTimeOriginal subseconds	475
DateTimeDigitized subseconds	475
Supported Flashpix version	1
Sensing method	One-chip color area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	28 mm
Scene capture type	Standard