IXO mod
Jump to navigation
Jump to search
About
The Bosch IXO has a lot of disadvantages (which I wouldn't recommend buying it, but since I own one, why not make it better?)
- Runs about 1sec after disengaging
- Is quite pricy
- No torque setting
- One-speed
- The bit holder won't lock
Adding a locking bit-holder
🚧 | If you want to try this, you're doing this at your own risk! |
Preparing a locking bit holder
I purchased a cheap, but locking bitholder. Then I cut the hex leaving about 12mm.
Drilled a 2.5mm hole
Cut M3 thread
Use a set screw
✅ | \o/ |