Difference between revisions of "Vacuum-Forming RC-Body Shells"

From Wurst-Wasser.net
Jump to: navigation, search
(Frames)
(The Form)
Line 26: Line 26:
  
 
== The Form ==
 
== The Form ==
 +
Ah yes - the most important part. The positive form. I could talk hours about what to do, and what not (that is, you supply enough beverages :-D ). :-D
  
 
= The Lessons Learned =
 
= The Lessons Learned =

Revision as of 20:17, 3 May 2020

This work-in-progress. Just wanted to let me know. :-D

The Goal

I wanted to make my own body shells, ones NO ONE got. Insane, I know. :)

Building

The Vacuum-Forming Tools

Boxes

I made two VacForm-Boxes: One with 50cm x 28cm and one 64cm x 34cm. Why?

  • The 50cm x 28cm - sized: because I can cut 3 sheets from the supplied 1000x500mm PET-G sheets[1]
  • The 64cm x 34cm - sized: because some body shells are too large for 50cmx28cm. Unfortunately I can cut only one out of above mentioned sheets.

The boxes are around 10cm high and have one 35mm - hole on the side to attach the vacuumer.

I recommend rubber seals like this: E-Profil-Seal

The finished box looks like this (and yes, drilling hundreds of 4mm-holes really bores the hell out of me):
VacFormBox01.jpg

If you have kids - great, let them help - they will be SO proud:
VacFormBox02.jpg

Frames

You also need a frame to mount the PET-G-Sheets in. Mine look like this:
VacFormFrame01.jpg

The Form

Ah yes - the most important part. The positive form. I could talk hours about what to do, and what not (that is, you supply enough beverages :-D ). :-D

The Lessons Learned

  • https://www.architekturbedarf.de/kunststoffe/pet-g-transparent/