Difference between revisions of "Vacuum-Forming RC-Body Shells"

From Wurst-Wasser.net
Jump to: navigation, search
(The Heater)
(The Heater)
Line 34: Line 34:
  
 
== The Heater ==
 
== The Heater ==
I ended up with a box fitting my two frames. It is about 60cm high and houses two RoWi 3KW heaters at the bottom and aluminium (YES. ALUMIN'''I'''UM!<ref>Brits: Be proud of spelling it right!</ref>) lining on the side walls:<br/>
+
I ended up with a box fitting my two frames. It is about 60cm high and houses two RoWi 1.2KW heaters<ref>https://toom.de/p/infrarot-quarz-heizstrahler-hqh-120031-1200-w/9350421?bbo=1&gclid=EAIaIQobChMI5fb8krqY6QIVb4BQBh0qugrgEAQYASABEgKMj_D_BwE</ref> at the bottom and aluminium (YES. ALUMIN'''I'''UM!<ref>Brits: Be proud of spelling it right!</ref>) lining on the side walls:<br/>
 
[[Image:VacFormHeater01.jpg|666px]]
 
[[Image:VacFormHeater01.jpg|666px]]
  

Revision as of 20:44, 3 May 2020

This work-in-progress. Just wanted to let me know. :-D

The Goal

I wanted to make my own body shells, ones NO ONE got. Insane, I know. :)

Building

The Vacuum-Forming Tools

Boxes

I made two VacForm-Boxes: One with 50cm x 28cm and one 64cm x 34cm. Why?

  • The 50cm x 28cm - sized: because I can cut 3 sheets from the supplied 1000x500mm PET-G sheets[1]
  • The 64cm x 34cm - sized: because some body shells are too large for 50cmx28cm. Unfortunately I can cut only one out of above mentioned sheets.

The boxes are around 10cm high and have one 35mm - hole on the side to attach the vacuumer.

I recommend rubber seals like this: E-Profil-Seal

The finished box looks like this (and yes, drilling hundreds of 4mm-holes really bores the hell out of me):
VacFormBox01.jpg

If you have kids - great, let them help - they will be SO proud:
VacFormBox02.jpg

Frames

You also need a frame to mount the PET-G-Sheets in. Mine look like this:
VacFormFrame01.jpg

The Form

Ah yes - the most important part. The positive form. I could talk hours about what to do, and what not (that is, you supply enough beverages :-D ). :-D

TBD TBD TBD TBD

The Heater

I ended up with a box fitting my two frames. It is about 60cm high and houses two RoWi 1.2KW heaters[2] at the bottom and aluminium (YES. ALUMINIUM![3]) lining on the side walls:
VacFormHeater01.jpg

The Lessons Learned

  • https://www.architekturbedarf.de/kunststoffe/pet-g-transparent/
  • https://toom.de/p/infrarot-quarz-heizstrahler-hqh-120031-1200-w/9350421?bbo=1&gclid=EAIaIQobChMI5fb8krqY6QIVb4BQBh0qugrgEAQYASABEgKMj_D_BwE
  • Brits: Be proud of spelling it right!