Difference between revisions of "Vacuum-Forming RC-Body Shells"

From Wurst-Wasser.net
Jump to: navigation, search
(Karmann Ghia)
(Karmann Ghia)
Line 43: Line 43:
 
I found a great STL at [http://www.thingiverse.com/thing:3278772 Thingiverse].
 
I found a great STL at [http://www.thingiverse.com/thing:3278772 Thingiverse].
  
I split it in 4 pieces and printed it:
+
I split it in 4 pieces and printed it:<br/>
 
[[Image:Ghia01.jpg]]
 
[[Image:Ghia01.jpg]]
  
 
While glueing it together I noticed:
 
While glueing it together I noticed:
* It doesn't have windows! Dang, should have checked this before!
+
* It doesn't have windows! Dang, should have checked this before![[Image:Ghia02.jpg|thumb]]
 
* It doesn't have lights! (same)
 
* It doesn't have lights! (same)
 
* I can't vacform this as one piece, because I would never get the form out.
 
* I can't vacform this as one piece, because I would never get the form out.

Revision as of 12:36, 5 June 2020

This work-in-progress. Just wanted to let me know. :-D

The Goal

I wanted to make my own body shells, ones NO ONE has. Insane[1], I know. :)

Building

The Vacuum-Forming Tools

Boxes

I made two VacForm-Boxes: One with 50cm x 28cm and one 64cm x 34cm. Why?

  • The 50cm x 28cm - sized: because I can cut 3 sheets from the supplied 1000x500mm PET-G sheets[2]
  • The 64cm x 34cm - sized: because some body shells are too large for 50cmx28cm. Unfortunately I can cut only one out of above mentioned sheets.

The boxes are around 10cm high and have one 35mm - hole on the side to attach the vacuumer.

I recommend rubber seals like this: E-Profil-Seal

The finished box looks like this (and yes, drilling hundreds of 4mm-holes really bored the hell out of me):
VacFormBox01.jpg

If you have kids - great, let them help - they will be SO proud:
VacFormBox02.jpg

Frames

You also need a frame to mount the PET-G-Sheets in. Mine look like this:
VacFormFrame01.jpg

The Form

Ah yes - the most important part. The positive form. I could talk hours about what to do, and what not (that is, you supply enough beverages :-D ).

DMC DeLorean

I found this STL on Thingiverse, plane-split it with MeshMixer and printed it...
DMC01.jpg DMC02.jpg DMC03.jpg DMC04.jpg DMC05.jpg DMC06.jpg DMC07.jpg

And then came filling and sanding. THAT was hard work...

Karmann Ghia

I found a great STL at Thingiverse.

I split it in 4 pieces and printed it:
Ghia01.jpg

While glueing it together I noticed:

  • It doesn't have windows! Dang, should have checked this before!
    Ghia02.jpg
  • It doesn't have lights! (same)
  • I can't vacform this as one piece, because I would never get the form out.

The Heater

I ended up with a box fitting my two frames. It is about 60cm high and houses two RoWi 1.2KW heaters[3] at the bottom and has aluminium (YES. ALUMINIUM![4]) lining on the side walls:
VacFormHeater01.jpg

Decals & Masks

Ah, no body shell without decals!

I use OraMask masking tape and Sattleford adhesive film with a Oki C332 colour laser printer, which can transport the film without bending.

DeLorean

This is how I design them using OmniGraffle: DMCDecals01.png

The Results

DeLorean

VacFormDMCResult01.jpg VacFormDMCResult02.jpg VacFormDMCResult03.jpg VacFormDMCResult04.jpg VacFormDMCResult05.jpg VacFormDMCResult06.jpg VacFormDMCResult07.jpg

The Lessons Learned

  • Print the parts as big as you can (meaning: less parts, less transitions, less filling, less sanding)
  • Filling takes more time than 3D-designing (see the Ghia's windows!)
    • Don't ever use different fillers on the same surface! (I did...and ended up with an surface on which I have two fillers, one is easy to sand, the other is not, which makes it very hard to get it levelled!)
  • 140°C is about right for PET-G
  • Act quickly! Heat it up, fire up the vacuumer and hit the box with the frame as fast and accurately you can!

  • Footnotes: