Vacuum-Forming RC-Body Shells

From Wurst-Wasser.net
Revision as of 20:12, 3 May 2020 by Heiko (talk | contribs) (The Vacuum-Forming Tools)
Jump to: navigation, search

This work-in-progress. Just wanted to let me know. :-D

The Goal

I wanted to make my own body shells, ones NO ONE got. Insane, I know. :)

Building

The Vacuum-Forming Tools

Boxes

I made two VacForm-Boxes: One with 50cm x 28cm and one 64cm x 34cm. Why?

  • The 50cm x 28cm - sized: because I can cut 3 sheets from the supplied 1000x500mm PET-G sheets[1]
  • The 64cm x 34cm - sized: because some body shells are too large for 50cmx28cm. Unfortunately I can cut only one out of above mentioned sheets.

The boxes are around 10cm high and have one 35mm - hole on the side to attach the vacuumer.

I recommend rubber seals like this: E-Profil-Seal

The finished box looks like this:
VacFormBox01.jpg

If you have kids - great, let them help - they will be SO proud:
VacFormBox02.jpg

Frames

You also need a frame to mount the PET-G-Sheets in. Mine look like this:
File:VacFormFram01.jpg

The Form

The Lessons Learned

  • https://www.architekturbedarf.de/kunststoffe/pet-g-transparent/