IXO mod: Difference between revisions
Jump to navigation
Jump to search
(Created page with "= About = The Bosch IXO has a lot of disadvantages (which I wouldn't recommend buying it, but since I own one, why not make it better?) * Runs about 1sec after disengaging * Is quite pricy * No torque setting * One-speed * The bit holder won't lock = Adding a locking bit-holder = {{Warning|If you want to try this, you're doing this at your own risk!}} == Preparing a locking bit holder== I purchased a cheap, but locking bitholder. Then I cut the hex leaving about 12mm...") |
No edit summary |
||
Line 28: | Line 28: | ||
[[Image:06_IXO_setscrew.jpg]] | [[Image:06_IXO_setscrew.jpg]] | ||
{{Success| | {{Success|\o/}} |
Latest revision as of 18:22, 14 June 2023
About
The Bosch IXO has a lot of disadvantages (which I wouldn't recommend buying it, but since I own one, why not make it better?)
- Runs about 1sec after disengaging
- Is quite pricy
- No torque setting
- One-speed
- The bit holder won't lock
Adding a locking bit-holder
🚧 | If you want to try this, you're doing this at your own risk! |
Preparing a locking bit holder
I purchased a cheap, but locking bitholder. Then I cut the hex leaving about 12mm.
Drilled a 2.5mm hole
Cut M3 thread
Use a set screw
✅ | \o/ |