CTC Bizer with 0.8mm Nozzle
Jump to navigation
Jump to search
About
A larger nozzle will result in much faster prints, right? Since it affects the printing volume it will affect it like this:
(new diameter / old diameter)^3 (0.8/0.4)^3 = 8
Hoorray! 8 times faster! At least I thought that…
The Problem
The Solution
Lessons Learned
As the author should already have known from RFC1925(8,9) is:
- (8) It is more complicated than you think.
- (9) For all resources, whatever it is, you need more.