CTC Bizer and Cura: Difference between revisions
Jump to navigation
Jump to search
(Created page with "I own an old Makerbot Replicator Clone, CTC Bizer. This worked fine with Simplify3D, but since I can't geht S3D working on my new Linux Notebook, I decided to switch to Cura....") |
No edit summary |
||
| (11 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
This is what I found on the Interweb. | This is what I found on the Interweb. | ||
* https://ctc-forum.de/forum/thread/1516-cura-15-04-gpx-post-prozess-aktivieren-um-x3g-dateien-zu-erzeugen/ | * https://ctc-forum.de/forum/thread/1516-cura-15-04-gpx-post-prozess-aktivieren-um-x3g-dateien-zu-erzeugen/ | ||
* https://3dkram.de/Drucker_CTC-Bizer/Cura_mit_CTC-Bizer_nutzen.html | * https://3dkram.de/Drucker_CTC-Bizer/Cura_mit_CTC-Bizer_nutzen.html | ||
But that didn't work out for me. For some reason the set temperatures were wrong (exchanged?). | But that didn't work out for me. For some reason the set temperatures were wrong (exchanged?). | ||
This is what I did: | This is what I did: | ||
* Installed the X3G- | * Installed the [https://github.com/Ghostkeeper/X3GWriter X3G-Writer] over the Cura Market Place | ||
* Added Makerbot Replicator machine | * Added Makerbot Replicator machine | ||
* Setup Machine (note the center-option! (And no, flavour isn't right, but my version of Cura keeps resetting to Marlin…)):<br/>[[Image:CTCBizerCuraSettings.png]] | |||
* Set start G-Code: | * Set start G-Code: | ||
(**** https://ctc-forum.de/forum/thread/1516-cura-15-04-gpx-post-prozess-aktivieren-um-x3g-dateien-zu-erzeugen/ ****) | |||
(**** https://3dkram.de/Drucker_CTC-Bizer/Cura_mit_CTC-Bizer_nutzen.html <-- besser ****) | |||
;{material_bed_temperature_layer_0} = Temperatur der Druckplatte fuer die erste Schicht | |||
;Erzeugt am: {day} {date} {time} = Infoanzeige von Datum im Gcode an dem der Gcode erzeugt wurde | |||
;{material_print_temperature_layer_0} = Drucktemperatur fuer erste Schicht (Materialtemp.) | |||
;Material-Flow: {material_flow}% = Info über den gewaehlten Material-Flow | |||
(**** start.gcode for The Replicator, dual head ****) | (**** start.gcode for The Replicator, dual head ****) | ||
M103 (disable RPM) | M103 (disable RPM) | ||
| Line 19: | Line 27: | ||
M190 S{material_bed_temperature_layer_0} ; wait for EXTRUDER final temp | M190 S{material_bed_temperature_layer_0} ; wait for EXTRUDER final temp | ||
M104 S{material_print_temperature_layer_0} (set HBP temperature) | M104 S{material_print_temperature_layer_0} (set HBP temperature) | ||
M133 T0 ; Stabilize right extruder temperature | M133 T0 ; Stabilize right extruder temperature | ||
(**** begin homing ****) | (**** begin homing ****) | ||
G162 X Y F2500 (home XY axes maximum) | G162 X Y F2500 (home XY axes maximum) | ||
| Line 28: | Line 36: | ||
G161 Z F100 (home Z axis minimum) | G161 Z F100 (home Z axis minimum) | ||
M132 X Y Z A B (Recall stored home offsets for XYZAB axis) | M132 X Y Z A B (Recall stored home offsets for XYZAB axis) | ||
(**** end homing ****) | (**** end homing ****) | ||
;G1 X-110.5 Y-74 Z150 F3300.0 (move to waiting position) | |||
G1 X-110.5 Y-74 | G1 X-110.5 Y-74 Z10 F3300.0 (move to waiting position) | ||
G130 X20 Y20 Z20 A20 B20 (Lower stepper Vrefs while heating) | G130 X20 Y20 Z20 A20 B20 (Lower stepper Vrefs while heating) | ||
G130 X127 Y127 Z40 A127 B127 ; Default stepper Vrefs | |||
G92 A0 B0 ; Zero extruders | |||
G1 X100 Y-70 F9000 ; Move to front right corner of bed | |||
G1 Z0.3 F6000 ; Move down to purge | |||
G1 X-90 Y-70 E24 F2000 ; Extrude a line of filament across the front edge of the bed | |||
G1 X-100 Y-70 F180 ; Wait for ooze | |||
G1 X-110 Y-70 F5000 ; Fast wipe | |||
G1 Z0.5 F100 ; Lift | |||
M73 P1 ;@body (notify GPX body has started) | |||
* Set End-G-Code: | * Set End-G-Code: | ||
M73 P100 ( End build progress ) | M73 P100 ( End build progress ) | ||
| Line 54: | Line 62: | ||
[[Category:3D | [[Category:3D Printing]] | ||
Latest revision as of 10:52, 21 May 2023
I own an old Makerbot Replicator Clone, CTC Bizer. This worked fine with Simplify3D, but since I can't geht S3D working on my new Linux Notebook, I decided to switch to Cura.
This is what I found on the Interweb.
- https://ctc-forum.de/forum/thread/1516-cura-15-04-gpx-post-prozess-aktivieren-um-x3g-dateien-zu-erzeugen/
- https://3dkram.de/Drucker_CTC-Bizer/Cura_mit_CTC-Bizer_nutzen.html
But that didn't work out for me. For some reason the set temperatures were wrong (exchanged?).
This is what I did:
- Installed the X3G-Writer over the Cura Market Place
- Added Makerbot Replicator machine
- Setup Machine (note the center-option! (And no, flavour isn't right, but my version of Cura keeps resetting to Marlin…)):
- Set start G-Code:
(**** https://ctc-forum.de/forum/thread/1516-cura-15-04-gpx-post-prozess-aktivieren-um-x3g-dateien-zu-erzeugen/ ****) (**** https://3dkram.de/Drucker_CTC-Bizer/Cura_mit_CTC-Bizer_nutzen.html <-- besser ****) ;{material_bed_temperature_layer_0} = Temperatur der Druckplatte fuer die erste Schicht ;Erzeugt am: {day} {date} {time} = Infoanzeige von Datum im Gcode an dem der Gcode erzeugt wurde ;{material_print_temperature_layer_0} = Drucktemperatur fuer erste Schicht (Materialtemp.) ;Material-Flow: {material_flow}% = Info über den gewaehlten Material-Flow (**** start.gcode for The Replicator, dual head ****) M103 (disable RPM) M73 P0 (enable build progress) G21 (set units to mm) G90 (set positioning to absolute) M140 S{material_bed_temperature_layer_0} (set EXTRUDER temperature, X3G-Plugin switches that?) M190 S{material_bed_temperature_layer_0} ; wait for EXTRUDER final temp M104 S{material_print_temperature_layer_0} (set HBP temperature) M133 T0 ; Stabilize right extruder temperature (**** begin homing ****) G162 X Y F2500 (home XY axes maximum) G161 Z F1100 (home Z axis minimum) G92 Z-5 (set Z to -5) G1 Z0.0 (move Z to "0") G161 Z F100 (home Z axis minimum) M132 X Y Z A B (Recall stored home offsets for XYZAB axis) (**** end homing ****) ;G1 X-110.5 Y-74 Z150 F3300.0 (move to waiting position) G1 X-110.5 Y-74 Z10 F3300.0 (move to waiting position) G130 X20 Y20 Z20 A20 B20 (Lower stepper Vrefs while heating) G130 X127 Y127 Z40 A127 B127 ; Default stepper Vrefs G92 A0 B0 ; Zero extruders G1 X100 Y-70 F9000 ; Move to front right corner of bed G1 Z0.3 F6000 ; Move down to purge G1 X-90 Y-70 E24 F2000 ; Extrude a line of filament across the front edge of the bed G1 X-100 Y-70 F180 ; Wait for ooze G1 X-110 Y-70 F5000 ; Fast wipe G1 Z0.5 F100 ; Lift M73 P1 ;@body (notify GPX body has started)
- Set End-G-Code:
M73 P100 ( End build progress ) G0 Z150 ( Send Z axis to bottom of machine ) M18 ( Disable steppers ) M109 S0 T0 ( Cool down the build platform ) M104 S0 T0 ( Cool down the Right Extruder ) M104 S0 T1 ( Cool down the Left Extruder ) G162 X Y F2500 ( Home XY endstops ) M18 ( Disable stepper motors ) M70 P5 ( We <3 Making Things!) M72 P1 ( Play Ta-Da song )